y scrub the silicon with the soft brush. If the wristband has printed details on it and are not embossed or debossed, be careful nolokai rubber bracelett to scrub away the markings.Silicone Bracelet wear for a long time, of course, will not be as bright as new, there will be dirty time, then, how should we clean and maintain the silicone wristbands? 1. Silicone hand rings are dirty. The most effective way is to rinse them with clean water. 2. The grease on the silica gel Bracelet should be coated with soapy water, wipe off the stain with a soft cloth, and then rinse off with clean water. Dry the water with napkins or soft cloth and blow it in a cool and ventilated place. 3. When encountering stubborn stains, they can be rubbed with cotton swabs dipped in alcohol. Above is the whole content of how to clean the silica gel bracelet. The author thinks that the first is maintenance, the second is cleaning, and the other is not to wash too frequently. You can also try using an eraser. Or clean with toothpaste. Look at your convenience with transparent adhesive or tape sticking. design-your-own-silicone-wristbandschristian-silicone-wristbands and 202mm. it should be bigger for the ankle bracelets. So the suitable size should be 160mm for toddler, 190mm for youth and 210mm for adult. We can also do 230mm and 250mm as extra large. 1/4 inch width is good for an ankle bracelet. Same as wirstband, the logo or slogan on ankle bracelet can be printed, colorfilled, embossed printed, debossed orlokai rubber bracelet embossed also. We make all the bracelet matching the pantone colors. The bracelet can be solid, segment, swirl, glowing and UV transfer. We can add glitter into the bracelet, it gain the effect of little stars. We color the logo with the silicoe ink which is eco friendly as well. Usually you can choose the logo style for normal easy design. If the logo is hard, we will advise the best one. Like if the outline is less than 0.3mm thickness, we can only use printed style. As the colorfilled, embossed printed, debossed and embossed require at least 0.3mm.